1st INTERNATIONAL CONFERENCE ON ELECTRICAL, COMMUNICATION AND COMPUTER ENGINEERING (ICECCE-2019) JULY 24th-25th SWAT SERINA HOTEL PAKISTAN

University of Buner (UoB) is a newly established university of Government of KP. The Department of Electronics is actively engaged in concern research espacially in antenna array, RF/Microwave System, Sensor, Network and Communication, Wireless Sensor Network, Satellite & Mobile Communication and Radar and Sonar Technology. Department of Electronics is going to organised Ist International Conference on Electrical, Communication and Computer Engineering, 24th-25th JULY,2019 in collabration with Faculty of Electrical Engineering, Universiti Teknologi Malaysia and Higher Education Commission of Pakistan. Prominent scholars from Pakistan and from the world are invited to research contribution. The main objective of the conference is to provide a unique oppertunity to engineers, scientist and professionals from around the world to come together in ICECCE-2019 at Swat Serina Hotel Pakistan and discuss the recent advances in Electrical and Electronic Engineering and related research areas. The ICECCE-2019 will be an important network oppertunity for faculty, researchers and students

Participants will share their experince on July 24-25, 2019 in the beautiful city of Swat. Swat is considerd as the Switzerland of ASIA.
Venue Address: Serina Hotel, Swat Pakistan

Conference Registration is open

IPID-DoST Postgraduate strand

25th July 2019, Swat Serena Hotel

Title of The Paper Author Postgraduate students are invited to submit extended abstracts (2 pages Maximum) that fall under the Information and Communication Technologies for Development (ICT4D) research areas.
The first postgraduate strand of the International Network for Postgraduate Students in the area of ICT4D (IPID) and Directorate of Science and Technology (DoST) – Khyber Pakhtunkhwa will be held in conjunction with the 1st International Conference on Electrical, Communication and Computer Engineering (ICECCE-2019). The objectives of the strand are to promote the profile of IPID and DoST in both local and regional communities, exploring and stimulating research collaboration opportunities with academia and facilitate knowledge sharing among researchers in local and international research communities.

Deadline for abstract submissions: 15 July, 2019 (submit to zamantariq@gmail.com)
Notification of acceptance: 17 July 2019

Travel Grants

IPID hopes to arrange travel grant for 10 participants and further information will be disseminated soon. A candidate can also submit an abstract for the session and application for travel grant if his/her paper is accepted for presentation in ICECCE-2019. 


SCOPE AND INTERESTS ICECEE 2019 technical tracks span new and original research in the areas of Electrical, Communication and Computer Engineering for applications in all fields of science and technology. Topics include, but are not limited to:
• Power Generation Systems
• Modeling and Simulation of Power Systems
• Power System Management Technologies
• Renewable Energy Systems, Technology & Management
• Applications of Power Electronics
• Electrical Machines and Adjustable Speed Drives
• High Voltage Engineering and Insulation Technology
• Signal and Image Processing
• Neural Networks and Intelligent Systems
• VLSI and MEMS Design
• Intelligent Industrial Process Control
• Intelligent Robotics and Control
• Satellite and Wireless Communications
• Antennas and Propagation
• Next Generation Mobile Communications
• Optical Communications and Photonics
• RF and Microwave Circuits and Devices
• Wireless/Radio Access Technologies
• Massive MIMO Communication Systems
• Applications of Compressive Sensing Theory
• Cognitive Radar Systems
• Networks and Security
• High Performance Networks and Protocols
• Network Reliability and QoS
• Internet of Things and Big Data
• Software Engineering and Agile Development
• Multimedia and Web Services Agents
• Cloud Computing
• Embedded Systems
• Virtual and Augmented Realities
• Human Computer Interaction
• Context awareness
• Ubiquitous Computing

Important Dates

Paper Due : 15th May, 2019
Acceptance Notification : 15th June, 2019
Camera Ready Due : 25th June, 2019

Registration Deadlines

Early Bird : 25th June, 2019
Normal : 05th July, 2019
Conference Date : 24th -25th July 2019

PAPER SUBMISSION
Authors are invited to submit previously unpublished work for possible presentation at the conference. The papers should be based on any the topics related to the objectives of the conference. The technical papers will be accepted up to 6 pages formatted in standard IEEE camera-ready format (double-column, 10-pt font),(paper format). Authors are requested to submit their papers electronically in PDF format via the ICECCE 2019 EasyChair submission site:https://easychair.org/conferences/?conf=icecce2019.All papers will be evaluated based on their novelty, fundamental insight, experimental evaluation, and potential for long-term impact; new-idea papers are encouraged.

University of Buner Sarhad University
Universiti Teknologi Malaysia
Higher Education Commission
IEEE
IEEE (Islamabad)
Islamic International University, Islamabad
Directorate of Science and Technology (DoST)

Web

http://www.ubuner.edu.pk/Front/icecce

International Keynote Speakers

Dr. Sheroz Khan

Professor and PG Coordinator
Department of Electrical and Computer Engineering
Faculty of Engineering, International Islamic University Malaysia
Tel: +603- 6196 4580, +60193515830; email: sheroz@iium.edu.my
Topic: Changing Scenario of Energy Grids –Renewable Energy Converters for Solar and Energy Storage Integration

Dr. Tariq Zaman

Associate Fellow,
Malaysian Commonwealth Studies Centre, Trinity College, Cambridge.
Title :-Civic Technology Design: Insights from South-South Research Collaboration

Dr. Atta-ur-Rahman

Department of Computer Science,
College of Computer Science and Information Technology (CCSIT),
Imam Abdulrahman Bin Faisal University, P.O. Box 1982, Dammam, Kingdom of Saudi Arabia
Topic: Application of Intelligent Systems in Adaptive Communications
Email: aaurrahman@iau.edu.sa

Dr. Atteq ur Rehman

Qatar Environment and Energy Research Institute (QEERI)
Hamad Bin Khalifa University, Qatar Foundation, Qatar.
Topic: Efficient and cost effective silicon PV technology,

National Keynote Speakers

Prof. Dr. Shoab Ahmad Khan

Department of Computer & Software Engineering CE&ME
National University of Sciences and Technology (NUST)
Peshawar Road Rawalpindi
Email: shoabak@ceme.nust.edu.pk

Future Trends in Electrical, Communication and Computer (ECC) Engineering for Knowledge Economy

The talk shall point out latest trends in ECC engineering and their relevance to knowledge economy for Pakistan. I shall give examples from the work I have been involved over the years in developing solutions that ranges from world highest density media processor chip to National Air Space Management System. I shall also highlight areas where Pakistan needs innovations like Industry 4.0, Internet of Things (IOTs), Communication and Networks, Software Defined Radios and Routers, ASICs and FPGA based designs, Artificial Intelligence and Machine Learning, Digitalization, are some of these fields where we should learn the new trends and innovations in these areas. We should focus in learning modern tools and techniques in these fields, especially their applicability in solving real-life problems to bring comfort in the life of people, giving visibility and transparency in systems, gain performance improvement and decision aiding in optimization of resources. Solving local problems with global relevance is key to our success in moving Pakistan towards knowledge economy. Being a member of Prime Minister Task Force on Knowledge Economy, I shall also highlight several initiatives the task force has worked for Pakistan transition to knowledge economy. The objective of the talk is to help our academia align with the technological needs of our country, especially engineering education that can has a profound impact on our progress and prosperity.

 

Prof. Dr. Aamer Iqbal Bhatti

Professor of Controls and Signal Processing
Research Group, Capital University of Science & Technology, Pakistan
Topic: Ground Surveillance Radar (GSR) development
Email: aamer987@gmail.com

Prof. Dr. Gulistan Raja

Department of Electrical Engineering,
University of Engineering & Technology, Taxila
Topic: HEVC: The High Efficiency Video Coding
Email:- gulistan.raja@uettaxila.edu.pk

Conference Topics: Areas of interest include, but are not limited to:
• Power Generation Systems
• Modeling and Simulation of Power Systems
• Power System Management Technologies
• Renewable Energy Systems, Technology & Management
• Applications of Power Electronics
• Electrical Machines and Adjustable Speed Drives
• High Voltage Engineering and Insulation Technology
• Signal and Image Processing
• Neural Networks and Intelligent Systems
• VLSI and MEMS Design
• Intelligent Industrial Process Control
• Intelligent Robotics and Control
• Satellite and Wireless Communications
• Antennas and Propagation
• Next Generation Mobile Communications
• Optical Communications and Photonics
• RF and Microwave Circuits and Devices
• Wireless/Radio Access Technologies
• Massive MIMO Communication Systems
• Applications of Compressive Sensing Theory
• Cognitive Radar Systems
• Networks and Security
• High Performance Networks and Protocols
• Network Reliability and QoS
• Internet of Things and Big Data
• Software Engineering and Agile Development
• Multimedia and Web Services Agents
• Cloud Computing
• Embedded Systems
• Virtual and Augmented Realities
• Human Computer Interaction
• Context awareness
• Ubiquitous Computing
• Global Software Engineering

PAPER SUBMISSION

Authors are invited to submit previously unpublished work for possible presentation at the conference. The papers should be based on any the topics related to the objectives of the conference. The technical papers will be accepted up to 6 pages formatted in standard IEEE camera-ready format (double-column, 10-pt font), (paper format). Authors are requested to submit their papers electronically in PDF format via the ICECCE 2019 EasyChair submission site: https://easychair.org/conferences/?conf=icecce2019. All papers will be evaluated based on their novelty, fundamental insight, experimental evaluation, and potential for long-term impact; new-idea papers are encouraged.

Registration

To Register and submit Proof of Payment: Fill out this Form:    Online Registration Form

The payment can be made at following bank account
Account Title:   University of Buner
Branch Code:   0932
Account No:      0932 79011797 01
Branch:               HBL Swari Bazar, Buner, KPK, Pakistan
IBAN No:              PK 95 HABB 0009 3279 0117 9701
Swift Code:       HABB PKKA XXX

Registration fee for authors and general participants will include access to all conference technical session, conference kit, teas and lunches.

Organizing Committee

Patron In-Chief

Dr. Muhammad Farooq, Project Director, University of Buner

Steering Committee

Prof. Dr. Salim Ur Rahman, Sarhad University of Science & Information Technology, Peshawar
Prof. Dr. Amir Qayyum, Capital University of Science and Technology, Islamabad
Dr. Mohamad Kamal A Rahim, Universiti Teknology Malaysia
Prof.Dr. Iftikhar Ahmad, Abbattabad University of Science and Technology

General Chair

Prof. Dr. Aqdas Naveed Malik, International Islamic University, Islamabad

General Co-Chair

Prof. Dr. Muhammad Amir, International Islamic University, Islamabad
Dr. Suheel Abdullah Malik, International Islamic University, Islamabad
Dr. Saeed Badshah, International Islamic University, Islamabad

Conference Chair

Dr. Shafqat Ullah Khan, University of Buner

Conference Technical Chair

Athar Waseem, International Islamic University, Islamabad

Conference Secretary

Eng. Sardar Ali, University of Buner

Technical Committee

Dr. Sajjad Ahmad Madani, COMSATS University, Islamabad
Dr. Mohsin Riaz, COMSATS University, Islamabad
Prof. Dr. Iftihar, Sarhad University of Science & Information Technology, Peshawar
Engr. Dr. Javed Iqbal, Sarhad University of Science & Information Technology, Peshawar
Dr. Faseeullah, Sarhad University of Science & Information Technology, Peshawar
Dr. Tahir Maqsood, COMSATS University, Abbottabad
Dr. Raja Waseem, COMSATS University, Abbottabad
Dr. Faisal Rehman COMSATS University, Abbottabad
Dr. Shahzad Sarwar, University of Punjab, Lahore
Dr. Laeeq Aslam, University of Punjab, Lahore
Dr. Syed Waqar ul Quonain Jaffry, University of Punjab, Lahore
Dr. Muhammad Murtaza Yousaf, University of the Punjab, Lahore
Dr. Muhammad Imtiaz Khan, Abbotabad University of Science and Technology, International Islamic University, Islamabad
Dr. Umar Javed, International Islamic University, Islamabad
Dr. Aurangzeb Khan, University of Science & Technology, Bannu
Dr. Asif Habib, National Textile University, Faisalabad
Dr. Ghulam Mustafa, University of Management, Lahore
Dr. Farrukh Zeeshan Khan, UET, Taxila
Dr.Khurram Saleem Alamgeer, COMSATS University, Islamabad

Program Co-chairs

Dr. Naveed Islam, Islamia College University Peshawar
Dr. Naimat Ullah, University of Buner
Dr. Shoukat Ali, University of Peshawar

Publication Co-Chairs

Dr. Zeeshan, Sarhad University of Science & Information Technology, Peshawar
Dr. Haji Rahman, University of Buner
Dr. Fawad Zaman, COMSATS University, Attock
Mr. Inayat Khan, University of Buner

Conference Co-ordinator

Dr. Fazli Wadood, University of Buner

Website and Local Arrangements Co-Chairs

Dr. Ihtisham Ul Islam, Sarhad University of Science & Information Technology, Peshawar
Mr.Muhammad Shabir, University of Buner
Mr.Israr Ahmad, University of Buner
Ms. Maryam, University of Buner

Registration Co-chairs

Muhammad Arshad Khattak, University of Buner
Ms. Aneesa Inayat, University of Buner

Industrial Co-chairs

Engr. Tila Muhammad, International Islamic University, Islamabad

Publicity Co-chairs

Muhammad Tufail, University of Buner
Dr. Hamid Hussain, University of Buner
Abrar Ullah, Universiti Teknologi Malaysia

Finance Chair

Mushtaq Ahmad, University of Buner

Submitted manuscripts should be formatted in standard IEEE camera-ready format (double-column, 10-pt font) (paper format). The review version must be in English and not exceed 6 pages of length and Papers should be submitted electronically in PDF format (formatted for 8.5×11-inch paper) via the ICECCE 2019 EasyChair submission site (https://easychair.org/conferences/?conf=icecce2019). Submissions must be original contributions that have not been published previously, nor already submitted to other conferences or journals in parallel with this conference. Submissions must include a title, abstract clarifying the relation of the paper with the topics above, keywords, author(s) and affiliation(s) with postal and e-mail address(es) and phone number(s).The paper must clearly state the problem being addressed, the goal of the work, the results achieved, and the relation to other work. Paper titles and/or author names cannot be changed and/or added to the papers once papers are submitted to ICECCE 2019 for review. Industry papers must be clearly marked as such, so that they can be appropriately reviewed by the program committee. Concerning length and formatting, industry papers must follow the same rules and guidelines as research papers. The Program Committee reserves the right to not review papers that either exceed the length specification or have been submitted or published elsewhere. A paper must be registered on Registration Portal by the deadline indicated below. Deadline for papers submission 15 May 2019 REVIEW AND PUBLICATION OF MANUSCRIPTS Submitted papers will be reviewed by the TPC and judged on:

  1. Originality, technical correctness, relevance,
  2. Innovation, Contribution to Knowledge Base and quality of presentation
  3. Objectives, research methods, theoretical and applied focus, outcomes, and potential practical application.

An accepted paper must be presented at the conference venue by one of the authors registered at the full registration rate.

CAMERA READY GUIDELINES

 

1- Preparing the Camera Ready Version

The length of the paper is limited to a maximum of 6 pages (including references) in the prescribed two-column format. Papers that are over the page limit and are not according to the prescribed format will be automatically rejected without further review. Papers submitted at ICECCE 2019 must be original and not be published or under review at any other venue. The papers should not contain any plagiarized material. ICECCE 2019 will follow the IEEE policies for the plagiarism cases. Papers must meet IEEE’s quality standards and ICECCE 2019 reserves the right not to publish any paper that does not meet these standards. Please note that ICECCE 2019 is technically co-sponsored by IEEE. The Conference Proceedings will be submitted to IEEE for inclusion in IEEE Xplore. IEEE reserves the right to exclude a paper from distribution after the conference (i.e. removal from IEEE Xplore). Each paper must be in PDF format, written in English and conform to the IEEE format available at: Format.

2- Verifying the Paper

ICECCE 2019 has registered to use IEEE PDF eXpress to generate and verify the format of all papers submitted. IEEE PDF eXpress is a free service to IEEE Conferences, allowing their authors to make IEEE Xplore-compatible PDFs (Conversion function) or to check PDFs that authors have made themselves for IEEE Xplore compatibility (PDF Check function).

3- Before Creating a PDF

Add the copyright notice to the left bottom of the first page of your source document.
a) For papers in which all authors are employed by the US government, the copyright notice is: U.S. Government work not protected by U.S. copyright
b) For papers in which all authors are employed by a Crown government (UK, Canada, and Australia), the copyright notice is: 978-1-7281-3825-1/19/$31.00 ©2019 Crown
c) For papers in which all authors are employed by the European Union, the copyright notice is: 978-1-7281-3825-1/19/$31.00©2019 European Union
d) For all other papers the copyright notice is: 978-1-7281-3825-1/19/$31.00 ©2019 IEEE
If necessary, contact ATHAR WASEEM at athar.waseem@iiu.edu.pk for the appropriate copyright notice.
Copy Right Form

4- Steps for checking or converting PDFs using IEEE PDF Express

S1. Create your manuscript(s).
S2. Proofread and check layout of manuscript (it is highly recommended that this be done BEFORE going to IEEE PDF eXpress).
S3. Create IEEE PDF eXpress account.
Log in to the IEEE PDF eXpress TM site : http://www.pdf-express.org/
First-time users should do the following:
Select the New Users – Click Here link.
Enter the following:
47252X for the Conference ID
your email address
a password
Continue to enter information as prompted.
An online confirmation will be displayed and an email confirmation will be sent verifying your account setup.
Previous users of PDF eXpress need to follow the above steps, but should enter the same password that was used for previous conferences. Verify that your contact information is valid.
S4.    Upload source file(s) for Conversion; and/or PDFs for Checking (Conference ID is 47252X). Uploading a paper to IEEE PDF eXpress is not the same as submitting the paper to the conference for review. The checked PDF paper still needs to be submitted by the normal means.
S5.    Use IEEE PDF eXpress to attain IEEE Xplore compatible PDF(s). The site contains extensive instructions, resources, helpful hints and access to technical support.
S6.    Submit final, IEEE Xplore-compatible PDF(s) as per the instructions found below.

5- Submitting the Camera Ready Version

You should submit your paper using your EasyChair author account by accessing the “Proceedings” menu.
30 June, 2019 is the hard deadline to submit the camera-ready version via EasyChair.
You also need to submit a zipped folder having name (Submission_Paper #.zip) through email (having subject: “Camera Ready Submission Paper Number”) to the following email address : icecce@ubuner.edu.pk. The zipped folder must contain the following:
All your LaTeX sources or a Word file in the provided format — Source files may be needed for minor formatting purposes etc. PDF version of your camera-ready paper (PDF must have passed the PDF Express checks). Please make sure that you use the same pdf file which has been verified by the PDF Express. Scanned version of signed and completed IEEE copyright form available at: IEEE Copyright Form. One copyright form must be submitted per paper.

6- Registration

28 June, 2019 is the deadline for Earlybird Registration.
10 July, 2019 is the deadline for Normal Registration.

Dr. M. I. Khan, Peter Grünberg Research Center, Jülich, Germany
Dr. Muzammil Behzad, University of Oulu, Finland
Prof. Dr. Amir Hussain, CogBiD Lab, University of Stirling, Uk
Dr. Ahsen Adeel, CogBiD Lab, University of Stirling, Uk
Prof. Dr. Sheroz Khan, International Islamic University, Malaysia
Dr. Azniza Murad, Universiti Teknology Malaysia
Dr. Abdul Basit ,University Science Technology, China
Dr. Nazar Abbas Saqib, Imam Abdulrahman Bin Faisal University, Dammam, KSA
Dr. Atta-ur-Rahman, Imam Abdulrahman Bin Faisal University, Dammam, KSA

Contact us

Dr. Shafqat Ullah Khan
Conference Chair
Email: shafqatphy@yahoo.com
Phone: 0092-333-9728487

Engr. Athar Waseem
Conference Technical Chair
Email: athar.waseem@iiu.edu.pk
Phone: 0092-334-8677790

For General Information

Dr. Fazli Wadood
Email: wadoodam@gmail.com
Phone: 0092-333-9292096

Engr. Sardar Ali
Email: sardar33@gmail.com
Phone: 0092- 300-9590811

Web

http://www.ubuner.edu.pk/Front/icece